Spektrum DX6i Replacement Trim Tabs (mod)

thingiverse

I modded thing:323708 to replace my trim tab/ trim lever om my Spektrum DX9. The axle I used is 3mm but should be slightly thicker (1/8” = 3.18mm). Print Settings Printer Brand: Leapfrog Printer: Creatr Rafts: No Supports: No Resolution: High Infill: 50% Notes: Printed with transparent PETG filament Post-Printing Metal axle for better durability The axle is a part from a carriage guidance rail from a broken CDROM drive. The axle is 3mm but should be slightly thicker (1/8” = 3.18mm). The hole was made exactly 3mm by hand using a drill The axle was cut to length (5/16” = 7.94 mm) and press fitted in the hole. How I Designed This Mod from thing 323708 Thing 323708 was a great start Imported STL in blender Reduced to 2D plane Exported as DXF Imported in Sketchup Changed contours Made 3D with push/pull to required thickness Exported as STL