Spider Halloween

cults3d

For this spinner, you need an empty filament spool. I chose a small size spool, designed for 500gr of filament, and whose width is 35mm. There are 2 kinds of parts to print, the body and the legs. The body is a hollow half-sphere, the inside has been modeled with a 55° cone, which allows printing without support. Printing parameters (Cura): Layer thickness: 0.2mm Media: no Filling: 10% cubic subdivision Adhesion: Brim Special feature: the "fuzzy skin" option was chosen to give the impression of a velvet spider. Tip: you may have to slightly adjust the body size according to the coil using the "scale" function. For my part, I had to saw a 2mm strip on the flange of the coil due to a small error in the measurement. Printing parameters of the flanges: Layer thickness: 0.2mm Support: no Filling: 20% cubic Adhesion: Brim Special feature: fuzzy skin option. The eyes are ping bridge balls. To make them glow I used commercially available electric candles. To glue the pieces together I used a hot glue gun.