Spooky Eye Pixel Box

prusaprinters

<p>This box is meant for 4 12mm RGB Pixels, each eye has 2 behind it.</p> <p>The design allows for an optional defusor to be able to block off light for each eye.</p> <p>The eyes were created from <a href="https://www.thingiverse.com/thing:3155043/files">https://www.thingiverse.com/thing:3155043/files</a>, special shout out to the author for making these available.</p> <p>The idea spooky eye box was taken from Spooky Eyes by Boscoyo (<a href="https://boscoyostudio.com/product/spooky-eyes/">https://boscoyostudio.com/product/spooky-eyes/</a>) and design was inspired by <a href="https://cults3d.com/en/3d-model/gadget/spooky-eyes">https://cults3d.com/en/3d-model/gadget/spooky-eyes</a>, but I wanted to remix to meet my needs so started from scratch.</p> <p>The goal of printing was study but least amount of filament as needed</p> <p>Print Settings for all parts</p> <p>.3mm layer height<br/> .44mm line width<br/> .88mm wall thickness (2 walls)<br/> .9mm top/bottom layers (3 layers)<br/> 25% infill</p> <p>I used a touch of hot glue on the bottom to hold the center diffuser in place.</p> <p>I added a 2nd version of the box, this one has 4 hexagons on the bottom to do 2 things, act as drain holes and reduce print material needed. I plan to use this version when putting in bushes or off the ground.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>200</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>10</p></div><br/> <strong>Filament:</strong><br/> Any PLA+/PETG Any</p> </p></p></p> Category: 3D Printing