Spool Desiccant Holder

prusaprinters

<p>I designed this desiccant cylinder to fit inside the center of a standard 1kg filament spool while inside a sealed plastic bag.<br><br>Printing instructions:&nbsp;</p><ol><li>Load in the model and orient as shown in the images.</li><li>Right click on the model and select add modifier, then load in the corresponding modifier model</li><li>Set the location of the modifier model to the center of the item (should be 0,0,0)</li><li>Change the settings of the modifier to 0 top layers, 0 bottom layers, 0 perimeters, and 30% gyroid infill</li></ol><p>If you loaded the files correctly then you should see a sliced image which matches the uploaded images.</p><p>Assembly instructions:</p><ol><li>Insert two M3 x 4mm x5mm heatset inserts using a soldering iron until flush and allow &nbsp;to cool</li><li>Fill container with desiccant pellets</li><li>Screw on lid with two M3 x 8mm screws</li></ol>