Spoolholder for Folgertech FT5 (2020 extrusion)
thingiverse
The spoolholder is made with standard 10mm aluminium rods I had laying around. Fits on top of the FT5 or on any other machine with 2020 CNC profiles. Length of the ALU-rods determine size (obvious, not?), so you can make it any size ... Angles are 60° Since only the feet are fixed on the profile, the holder can be easily disassembled if needed. 2 versions : one for 10mm rods, one for 8mm rods. Added some 10mm clips to keep the spool in place. Added a filament guide to keep the filament 'under control'. Modified the guide a bit Print Settings Printer: Folgertech FT5 Rafts: Doesn't Matter Supports: Yes Resolution: your choice Infill: 50% Notes: Higher infill is needed to get a nice closed surface on top, not for the strength I used 4 perimeter shells and 4 top/bottom layers I printed the top part upside down and the bottom part as it will be mounted. The bottom part needs support!! Settings for PLA : 0,3mm layer height, 200°C
With this file you will be able to print Spoolholder for Folgertech FT5 (2020 extrusion) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Spoolholder for Folgertech FT5 (2020 extrusion).