Spray Can Straw Holder / Mount - Universal - Magnetic e.g. for WD-40 cans !!<100mm filament!!

prusaprinters

<p>As I already have remixed a straw holder which only fits the 150ml and 250ml bottles of WD-40 i was wondering if there is something universal….<br>…now stumbling across the "Flash Contests Theme: Last Meter" I went for the universal and minimal approach. I still had the 6mm diameter and 3mm high magnets lying around from another project….<br>….the design can be printed with 100mm (approx 4 inch) of filament. I also tested it with a 0.2mm nozzle and brought it down to 90mm, to be precise: 89,19317mm<br><br>End of Skirt:<br>G1 X100.935 Y99.294 E4.36108<br>G1 F1500 E2.36108<br>;MESH:spraycan_straw_clip_holder.stl<br>&nbsp;End of Print:<br>;TIME_ELAPSED:327.391588<br>G1 F1500 E93.55425<br>M140 S0</p><p>&nbsp;</p><p>I have also included the FreeCAD model and a step file if you want to tune on your own.</p><p><strong>Attention:</strong> the included gcodes are for:<br>- CubeAnet 8 (coreXY printer with direct drive and a 200x200 bed running a 0.2mm nozzle) and just for the fun of it</p><p>-CR-10s Pro V2 with a BIQU H2 drircet drive running a 0.4mm nozzle….<br><i>….and yes, since I was to lazy to search for my PEI bed for this printer and my bed is completely worn down (check out picture), I had to invest <strong>30mm</strong> in to a prime line and a brim ;)</i></p><p>….but if someone running a prusa slicer just send me the gcode via PM and I will include it for the Prusa printers</p>