Square Corner 3.5 Inch Hinge Shim
cults3d
For square corner 3.5 Inch hinges with 3 holes. Insert one or more of these, between door frame and hinge, to reduce gap between strike plate and latch bolt. Can also be used to re-align sagging doors where the bolt does not settle in strike plate because it is too high (add to upper hinge only) or too low (add to lower hinge only). These can also help with doors that bind on last few inches of closure because the hinge mortises were cut too deep. The shim is 1mm thick. Use multiples or scale Z axis for other thicknesses. Installation: Remove center hinge screw. Loosen the upper and lower screws enough so the shim can be inserted. Retighten all 3 screws.
With this file you will be able to print Square Corner 3.5 Inch Hinge Shim with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Square Corner 3.5 Inch Hinge Shim.