Squash Ball Vibration Isolation Foot - CR-10 Feet M4 SquashBall

thingiverse

I wanted squash ball vibration isolation feet for my CR-10 but many of the designs I found replaced the aluminum corner plate, and I wanted to keep the original metal part in place for rigidity. So, I designed this squash ball holder to mount in place of the stock rubber foot pads. Standard 40mm squash balls fit nicely in the holders, and there's appropriate clearance for the stock machine screws to clamp the feet without bottoming out on the frame extrusions or interfering with the balls. Should be an exact fit replacement on the CR-10 as well as many other printers that use screw on rubber feet. Enjoy! Note: Compared to StevenFayers design (which seems to be the standard) https://www.thingiverse.com/thing:2772861 these are 8mm taller (technically 8.05mm, but I'm positive that the .05 is negligible). At this time, I have not designed a 20mm taller version for the Y axis extrusion. I'll update this thing if I do. Drawn with DesignSpark Mechanical, RSDOC source is included.