Squoddy-P - Print in Place Bali Trainer

thingiverse

I've updated file files. There are 2 new complete files. There have been some tweaks, the biggest thing is a thicker blade. I'll redo this post sometime, but for now here's a summary of the files. Squoddy-P - Most up to date model. Thicker "blade" with a better shape causing more weight in the blade. Squoddy-P_-_Weight_Bar - This has a bar down the middle of the "blade" to increase weight. This is the one I like best. Squoddy-P - Single Handle - Old single handle. Squoddy-P - Both Handles - Old both handles the correct distance apart to add the blade. Squoddy-P - Blade - Old, thinner blade. Center this with the "Both Handles" model to print. Squoddy-P - Complete - Old complete model with thinner blade. Original: This should work without any supports. I printed it with a brim. As soon as it's done, get it off the print bed and break loose any little stuck parts. Then it's good to go. Print the "complete" file as is. Position it vertically so the pivots are at the bottom. I printed at .2 layer height in PLA with 90% infill and I got it up to about 2 oz total weight. I also provided the blade and handles separate. Center them in all directions in your slicer to make it print together. Maybe some people will use this for multi extrusion... idk. I also provided a single handle so you could do some customization. Then just position the handles and blade like I have and print away. BTW, it's not really a remix as I started from scratch, but this was heavily inspired by impliedchaos's https://www.thingiverse.com/thing:2290677. I may keep working on this and upload revisions.