sram brake matchmaker clamp
thingiverse
This is a https://www.thingiverse.com/thing:4172914 remix, increase 1mm, fill in the circumference so that it fully insure on the handlebar for better tightening. I also eliminated the excess on the tips, because it touched the brake before achieving the tightening. Files: .stl and .3mf are two format of same piece. .gcode its for download and print directly from sd-card. Layer Hight: 0.16 Wall Thickness: 1.4 Wall Line Count: 3 Infill: 70% (maybe can be less, i tested with that) Infill Pattern: Cubic Subdivision Printing Temp: 196º Plate Temp: 45º Print Speed: 50mm/s Material: I used PLA but think the best for this is ABS. You need also: M6x30mm screw and nut I used "Custom Support Cylinder" Plugin to put square 4x4mm support only in the center of both holes.
With this file you will be able to print sram brake matchmaker clamp with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on sram brake matchmaker clamp.