Sram GXP pressfit install tool
prusaprinters
<p>This is an old design that I imported from my prints on Thingiverse.</p><p> </p><p>This is a remix from the parts needed to install a bottom bracked from <a href="https://www.thingiverse.com/thing:2303747">https://www.thingiverse.com/thing:2303747</a></p><p>I made this to install a Sram GXP pressfit bottom bracket. I will make some tools to remove the bottom bracket when I need them or remove the crank for maintainance.</p><p>The drive and non drive side bushings are marked with "drive" and "non drive" on the underside.</p><p>To install the bottom bracket see the instuctions here: <a href="https://www.thingiverse.com/thing:2303747">https://www.thingiverse.com/thing:2303747</a></p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Colido/Printrite DIY</p><p> </p><p><strong>Rafts: </strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p> </p><p>No</p><p> </p><p><strong>Resolution: </strong></p><p>0.2</p><p><strong>Infill:</strong></p><p> </p><p>40%</p><p><br> </p><p><strong>Notes: </strong></p><p>Maybe it will work with less infill. But the old bottom bracket was a very tight fit so I wanted to make sure it was strong enough.</p><p>Printed in PLA.</p><p> </p><p> </p><p> </p><p>Category: Sport & Outdoors</p>
With this file you will be able to print Sram GXP pressfit install tool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Sram GXP pressfit install tool.