stackable plant pots for pillar

prusaprinters

<p>To keep my family smiling in these worried times and to have them something to do, I have created a set of plant pots for our pillars on the terrace. The pillars are 100x100 mm with a corner radius of 12.5 mm</p> <p>There are these items:</p> <ul> <li><p>a bottom bracket if you don't wanna start from the bottom. Use a<br/> ratchet strap to fix it.</p> </li> <li><p>a top bracket to fix the uppermost pots from falling down - also take a ratchet strap if it doesn't seem to be save without it</p> </li> <li><p>a middle pot, it is the smallest one to give the pots below enough light</p> </li> <li>a right pot normal size. This pot you can also mirror to mount it on the left side!</li> <li>a right pot XL size. also if you wanna have a left one - just mirror the right one!</li> </ul> <p>I had to make two different sides, cause I have on one side our fly screens and not the same space as on the right side</p> <ul> <li>a left pot normal size</li> <li>a left pot XL size</li> </ul> <p>Also included is my scad file, if you wanna change some things. It's only recommended if you are used to OpenSCAD, it's not customizable programmed.....only for preview and export you can decide with pot you wanna see/export.</p> <h3>Print instructions</h3><p>I have also included my 3mf files from the pots. All pots are printable without support. I have choosen 20% infill, 0,3 mm layerheight and printed them with 3dJake PETG.</p>