Star Citizen 300i Spaceship Model

thingiverse

Star Citizen is a space sim being developed by Chris Roberts, RSI, CIG. This Origin Jumpworks 300i is derived from the current (May, 2014) Hanger Module in Star Citizen. It has been scaled to a 180mm (7in) x115mm (4.5in) x42mm (1.7 in) profile. The 300i is one of the initial flyable ships. This model has been modified for easier 3D printing. There are two ship files and both are identical profiles. Only one is needed. SUPPORTED has cross bars to break up and make the exterior supports more rigid. If your exteriror supports run down the X-axis (180mm long) then this is the prefered file. GUNNED has no cross bars to break up the exterior supports. If not using exterior support OR your supports have modified parameters to assist in making them rigid, then the GUNNED version may possibly work better for you. Also included in a separate build profile are the Mass Driver and Lasers by themselves. TWO (left and right) A&R Omnisky VI Laser ONE Klaus & Werner Sledge II Enjoy, and happy printing. - DRUM out Instructions Three files presented. 300-Supported: When exterior support was used, the 180mm lengths made them unstable. Cross bars were added to shorten the support runs and keep them rigid. 300-Gunned: Same as the Supported but minus the cross bars. Can be used if you have modified support parameters that would break up a long support run. 300-JustGuns: What it says. This can be used to remake them if the weapons fail when made with the ship. They are aligned, so if you wish to rotate them and print vertical it shouldn't be a problem. Used 20% fill and 4 wall thickness for print. Prefered size = 180mm+ STL Profile = 180mm Smallest successful print = 100mm