Star Trek Enterprise inspired Communicator

cults3d

Star Trek Enterprise inspired Communicator (TV 2001-2005) First off, this model is NOT to be sold, remixed or redistributed (that also means selling prints). I'm making it available FREE for personal use only. If you are doing anything that makes money with it, you are violating my copyright, as well as the intellectual property rights of CBS. An inspired communicator device from Star Trek: Enterprise. The Enterprise crew used similar communicators throughout the show’s run. Can be printed in PLA, HTPLA, HTPLA+ (3D870) or PETG. We recommend Natural or Grey PLA 3D870. In USA you can buy inexpensive 3D870 PLA from our favorite shop:https://fusionfilaments.com/collections/htpla-filament-1 Inside, the communicator designed to have a printed screen applique behind a sheet of acrylic with signal and battery readings. Dimensions: 1.5 cm x 4.7 cm x 9.1 cm Kit is designed for experienced makers and will require careful priming, sanding, gluing and painting of plastic parts. BOM: 1. 3d printed parts: - Communicator body, - Flip-top front panel (optional painting helper stand) - Side button - 2 front panels - Dial button 2. Painted or Unpainted brass hinge 3. Printed screen applique 4. A small sheet of acrylic (21mm x 25mm, thickness: ~0.8mm) Hinges used: Everbilt 3/4 in. x 11/16 in. Bright Brass Middle Hinges. https://www.homedepot.com/p/Everbilt-3-4-in-x-11-16-in-Bright-Brass-Middle-Hinges-19724/204485781 3d printed parts will require priming, sanding, and painting to be a finished prop. Tested with following primers: - Rust-Oleum Gray Filler Primer - Rust-Oleum Painter's Touch 2X Ultra Cover All-Purpose Spray Primer Proper fit and tolerance with other primers is not guaranteed. When printed in PLA keep away from direct heat such as fireplaces, hot cars, or direct sunlight. We test everything we do to make sure that it's printable and work as expected. Brought to You by Fluffy Pants Studio