Steam Dock with USB Hub

thingiverse

Dock for the Steam Deck, remixed from user _JustSid_ to accommodate this [DockTeck 5-in-1 USB-C Hub](https://www.amazon.ca/gp/product/B08SM393WB/) (V2) and the 6-in-1 Version (V4) <h3>V2: 2022-09-21 (5-in-1)</h3> Updated to have rear-facing ports on the USB hub for a cleaner look. Hub now only goes in from the top to prevent it from sliding left and right. Tested HDMI port, opening is wide enough and perfect for the default Nintendo Switch HDMI cable. Strengthened the hub enclosure. Print has been tested, fitment and balance good to go! <h3>V4: 2022-10-12 (6-in-1)</h3> Repaired and updated V4 to fit the [Dockteck 6-in-1](https://a.co/d/dfvPYVR). Back support legs lengthened to accommodate heavier adapter and prevent tipping. As per requested, I've separated this into three parts, the base and top parts will need to be joined together with the provided biscuit and some superglue (it's not pressure fitted). Let me know if this one works! ----------------------------------------------------- [Buy me a coffee](https://www.paypal.com/paypalme/spencerblackwood) :) ----------------------------------------------------- Archive: <del><h3>V1</h3></del> <del>The hub is moved off-center to avoid blocking the air intake on the back of the Deck.Notes: Print may benefit from printing at an angle of 15 degrees to allow aligned vertical layers for the top half of the print. </del> <del><h3>V1: 2022-09-20</h3></del> <del>Dimensions and tolerance are good for the USB hub. I don't like how the USB/HDMI ports point upwards and doesn't hide the cables, so I might redesign for rear-facing ports instead. The framed enclosure for the USB hub is fairly thin and fragile due to angle of print. I'll look to thicken this part of the structure on next iteration. Definitely recommend printing at an angle to ensure vertical strength (as mentioned above). </del> <del><h3>Update V3: 2022-10-04</h3> Added a new version __V3_Dock-USB_6-IN-1.stl__ to fit the [Dockteck 6-in-1](https://a.co/d/dfvPYVR). Back support legs lengthened to accommodate heavier adapter and prevent tipping. Let me know if this one works as I don't have this adapter to test. </del>