Steering Damper Mount + (optional Kobalt Battery / Boost Converter Mount and Enclosure) for Electric Skateboards

thingiverse

This is a two part upload for (1) a steering damper mount on a skateboard,or (2) steering damper mount with built in Kobalt Battery holder + boost converter enclosure for charging on the go: 1 - Just the Steering Damper mounts (Damper Stiffener v4 ... files) 2 - Steering Damper mounts + battery mount + boost converter enclosure (Damper, Battery, and Boost Converter ... files) The damper motor mount portion is designed to fit on a Torqueboards motor mount. They share some parts such as the motor mount piece. I've provided .STEP files for easy modification, say for example if you only want the boost converter mount and not the steering damper arm attached, you can easily make that happen in your favorite CAD program. Parts required, I won't give an exhaustive list, but if you want, e-mail me at skatardude10@gmail.com to ask for details. In general, for the most part it's just a bunch of M4 bolts of varying sizes, M4 nuts, for the steering damper mount it uses M8 nuts and machine screws, for the battery connections on the Kobalt battery mount part, use https://www.lowes.com/pd/AMERICAN-VALVE-1-2-in-to-1-2-in-dia-Copper-Plated-Steel-Milford-Hanger/3223453 something like that... Meh, if you really care to make it i'm sure you can pull it up in CAD and figure it out. If not, shoot me an e-mail. This is the boost converter: https://www.amazon.com/gp/product/B01MG4211N/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 This is the watt meter: https://www.amazon.com/gp/product/B01LVTST80/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 This is the steering damper: https://www.aliexpress.com/item/Motorcycle-Adjustable-Steering-Damper-Stabilizer-for-Suzuki-GSXR-600-750-1000-1300-Yamaha-XJR1300-FZ1-FAZER/32791821784.html?spm=a2g0s.9042311.0.0.346e4c4dieW3WA If you want to use the steering damper on your setup, download the STEP files and check for clearance. Make sure you can get full range of motion with the damper positioned at 50% travel. Also, the mounting brace on the damper only slides up and down so much, and if you have less distance between the top of your board and your motor mounts, you will have to get creative with the STEP files or design your own mounts that allow for the damper to fit correctly. I used Nylon for all these prints. I wouldn't expect it to hold up with much else, maybe PETG.