Stepcraft HF500 Vacuum 32mm adapter

thingiverse

I had a look at [this part](https://www.thingiverse.com/thing:2918227) but I wanted something that would print easier (less support) and accept easy to change adapters that could be designed as needed. This one has a completely flat bottom and very little need for support. Magnets used are from [here](https://www.banggood.com/nl/20pcs-N50-10mm-x-3mm-Strong-Round-Magnets-Rare-Earth-Neodymium-Magnets-p-984372.html?rmmds=search&cur_warehouse=CN) 10mm diameter and 3mm thick. You will need 3 for the base and 3 for every adapter. Bolt is M6. I made my own brush. Just print the part, use the hair from a cheap brush and glue it in the groove. After that cut it to length as needed. I made 3 different adapters with 3 different lengths. Printed in ABS, 0.3mm layers and a 0.6mm nozzle. I tried with several settings and types of bits on plywood. Works very well or even excellent.