Sticky Note Holder

prusaprinters

<h3>Description</h3> <p>This is a simple arched sticky note holder I made with some clouds on either end to resemble a rainbow for my girlfriends extensive collection of sticky notes. It should be a simple print although it may take awhile and I don't recommend scaling because the stick notes probably won't fit in the holes any more. The holder can store up to 15 sticky note pads at the standard size of 76.5 mm<em>76.5mm</em> 5mm post-it notes but can fit wider sticky notes up to 80mm in length</p> <h3>Files</h3> <p>I've included the Sticky Note Holder STL as well as a size test STL file which is the same size as the squares in the holder. This way you can make sure your sticky notes will comfortably fit in the squares prior to printing</p> <h3>Recommended Settings</h3> <p>Should be an easy print overall I left it to print overnight and it printed perfectly</p> <p>Infill: 10-15% (you can play with this a bit)</p> <p>Supports: Yes touching build plate only (I used 80 degree overhang supports with a 3% density)</p> Category: Office