Strix StratoSurfer FC Mount (Clamps to ply tray)

thingiverse

While building my StratoSurfer and planning for the FC I quickly realized that it was going to be a pain to mount the FC directly to the ply tray and I wanted a removable solution to make it easier to work on. I designed this tray to allow a 30.5 x 30.5 pattern FC / stack to bolt up and be removable as needed. In my case I'll be using the BrainFPV Radix / WPB wing PDB. 12/31/19 - I added a flat plate that will let you install a Matek -Wing (F405-Wing, F722-Wing, F765-Wing, F411-Wing, or F411-WSE) or probably even an Eagletree Vector etc to a removable plate to make it easier to work on. The small box on the one end of the 30x30 mount is for a servo break out board in case you want to break out more servos like I needed to for the Radix FC. The break out board it's designed for is this one: https://oshpark.com/shared_projects/8vRgE7iv To install it, hook it over the rear of the play tray the the clamp piece goes under the ply tray. Use a M3 screw to clamp it. I used a M3 bolt to tap the underside 'clamp' piece before installing it.