Strong Ikea Antilop leg support

thingiverse

A different idea of leg support for the Ikea Antilop high chair. What you need for the whole support: - One print of "Rest_supports" stl file. Can be either of the files, v3 has extra 2 wholes for 3.5x12mm screws to strenghten the whole thing even more, - One print of "Bar_support" stl, - 6 x Knob_for_nut.stl, - 6 M5 metal nuts, - 6 M5 x 30 mm screws, - one piece of wood 350x95x18mm (L x l x h) - 5mm wooden drill, - One print of "Hex_key_with_hole.stl" (optional) - one print of "Cutting_tool.stl" (optional) but it will help you cut the corners of the wood and make the drill holes for the support, - 4 x 3.5x12 mm screws (optional, only if you choose to print "Rest_supports_v4.stl") Once all components are printed, you just need to cut the wood, make the holes for the support and assemble it. I use a small amount of glue to keep the nuts from falling out of their knobs. You can use the printed key to tighten the support firmly in place. Optional, you can cut some small parts of anti-slippery material to keep the support sliding down when the kid is pushing into it.