Subaru EJ No Mess Oil Filter Wrench Funnel

thingiverse

This is a no mess oil filter wrench funnel to be using during normal maintenance oil changes on the Subaru EJ series motor. This is designed to fit authentic Subaru oil filters (specifically part number: 15208AA12A). I was tired of getting covered in oil when removing the oil filter on my STI due to it being the vertical orientation. Print Settings: Filament: Hatchbox Black PLA (or use your favorite filament) Infill: 15% (it really comes out to 100% with 3 walls so not really sure this matters) Layer Height: 0.2mm Nozzle: 0.4mm Microswiss Brass Plated Brim: 10mm No Supports Operation Instructions: 1. First break the oil filter loose. You may be able to slip the wrench funnel over to gain more leverage but really if the oil filter was hand tight during the last change, it should break free without a significant amount of force. 2. Push wrench funnel up onto the oil filter and loosen until oil begins to drain. Ensure a container to catch the excess oil is placed under the funnel exit. The design is to "press-fit" over the oil filter so it will stay in place while the excess oil drains. 3. Once the oil has stopped draining, completely unscrew the oil filter and remove. 4. Enjoy no mess!