Subaru WRX Morimoto Fog light bracket

thingiverse

This is a bracket to fit Morimoto Fog Lights onto WRX 08-09 bumpers using the oem bumper brackets. Might fit other years as well It is imperative for the model to be printed in TPU otherwise it will be impossible to fasten to the bumper and it wouldn't handle shocks , vibrations and extreme cold temperatures. To fasten I used 7 x 1" Hexagon Stainless Steel Bolts 1/4" 7 x Nylon Lock nuts also 1/4'' obviously 10 x Washers To install it's a pain. 1. Mount the light onto the printed part. (Make sure the light is pushed as far as it can go towards the exterior side of the bracket (If your looking at it straight for a driver side it should be as far to the right as possible on the bracket) 2. Place the light and bracket inside the bumper to find the best exact spot for the light. 3. Once in place fasten the bottom exterior foot first. (You'll need to hold the nut from outside the bumper through the bumper hole with a wrench and fasten it from inside the bumper with a ratchet, or get creative somehow, or take the bumper off, really haha) 4. Screw in the upper part and finish off with the remaining bottom foot. I haven't spent more time into optimizing this model, so sharp corners, no rounded edges etc, it just works. Feel free to remix it and share. If you use it please take pics and share. The morimot fog lights are ment for the STI bumper so I don't see why this model wouldn't work for other STI ment fog lights. ********This is the drivers side model***********for passenger side, mirror the model and reprint.