Super Mario Question Mark box
thingiverse
This a 75mmx75mm Super Mario Question Mark Box. It has a snapping lid. The walls have 1.2mm, so 3x 0.4 nozzle wide. I have printed it on my Da Vinci Minimaker, and I had a few issues with warping and under extrusion. It is not design related... Hope you'll have better success with your print ! _____________ Update : it appears that my Cura setting were no good for thin wall, even if I've design this print to fit 0.4 nozzle. I tough I had under extrusion on my first print, but it seems it was a poor link between first and 3rd layer of the walls even if I check 100% infill in CURA. I've printed my second one in XYZprinting slicer and it did print well except some artifacts from the slicer... So beware if you're using CURA, and feel free to share you're setting for thin walls.
With this file you will be able to print Super Mario Question Mark box with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Super Mario Question Mark box.