Super Strong coat , towel and key hook

prusaprinters

<p>Made a hook with a hole to hang some stuff around the house.</p><p>it is strong enough to hang a winter coat, i believe it can bear a lot more load but didn't test the max strength.</p><h3><strong>Print settings&nbsp;</strong></h3><ul><li>layer height: 0.12 mm</li><li>Number of walls: 4</li><li>infill: 30% ( more infill equals more strength)</li><li>Material: I used PLA. PETG, ABS, and other materials are possible.</li><li>supports: no</li></ul><h4>Installing:</h4><p>You will need for this build</p><ul><li>1 flathead screw 35mm long. 3,4 or 5 mm thick.</li><li>A 30mm long wall plug that suits your wall needs (drywall, wood etc). And diameter screw.</li><li>A drill bit with the same diameter as the wall plug.</li><li>a drill.</li><li>Hammer</li></ul><p>Choose where you want the hook. Mark a point where you want it. Pre dill the hole a bit if the wall is smooth. Drill the hole 35 mm deep. &nbsp;Hit the wall plug in with a hammer. Screw the hook in the wall with the screw.&nbsp;</p><h4>Coming updates</h4><p>will add a plaster wall plug in the future to print yourself.</p>