Supermarket refrigerated fruit vegetable open display cooler siphon drain !!!

thingiverse

Sifon Cooler 40mm for a Supermarket-refrigerated-fruit-vegetable-open-display-cooler. Woow something for scrabble... Vegetable coolers tend to condense, i designed a 3 part sifon that would fit the existing 2 wholes on each side which fit a 58mm whole and properly drains all the condensation water and still keep the smell outside. It should fit the regular pvc pipe 40mm couplings. If the nut does not fit change the size of the nut not the size of the siphon. change it only in the x and y axes leave the z axe as is .This will increase/decrease the pitch of the thread and the nut will definitely not fit. You do not need/have to use supports as i fitted the supports in the model. Revised version update : 12-12-16 Changed Cup size... Revised version update : 22-12-16 Changed Cup was not attached to the part underneath. Revised version update : 23-12-16 After actually installing the part it seems the part gets a lot of force when screwing the nut And I also used a RUBEBER FLAT RING between the top and nut to get a water tight seal. Changed siphon top side more length on the bevel to get more strength. shorten the slip coupling with 10mm and made the wall thickness slightly bigger. Please if you like the model and planned to make it please post a make https://www.thingiverse.com/thing:1961093/make . I would appreciate a nice cup of coffee during modeling and it helps me a lot by supporting me. https://www.paypal.me/Vanvoorn Update : 24-12-16 It fits perfectly as off now the model is a finished product to reproduce. Does not break and has good sealing properties, i also made sure i used a small amount of silicone to make absolute sure it does not leak. Print Settings Printer Brand: RepRap Printer: prusa i3 pro b mendel Rafts: No Supports: No Resolution: 0.3 Infill: 100%