Suzuki DRZ400 Low-Pro Dash

thingiverse

This is a low profile dash for any model year DRZ400S/SM/E using the stock light cluster, ingnition switch and a Trail Tech vapor speedometer. This mod was specifically designed to be used with a KTM headlight assembly but will fit stock assemblies. I recommend getting the dash mount laser cut out of 1/8" 5052 aluminum so I included a dxf file. I used https://sendcutsend.com/ and had it bent at a local fab shop. Hardware: M4 thread inserts (3x) https://www.bondtech.se/en/product/thread-inserts/ M4 x 8MM screws (3x) M4 x 10MM screws (2x) normally included with the Trail Tech Vapor M6 x 35MM OR M6 x 40MM screws (2x) M6 washers (2x) Number 8 x 5/8" Philips head screw (2x) If you have never used heat set threaded inserts here's a good link for reference: https://hackaday.com/2019/02/28/threading-3d-printed-parts-how-to-use-heat-set-inserts/