Switch Card Holder Rolodex Style

thingiverse

This is a remix of an SD Card holder, but modified to hold Nintendo Switch cartridges. I also added some flair with some Switch logos on the spool and on the base. Note: My design for the Switch card holders were a bit off. LOStheNERD had re-designed the holders to be a better fit and gave me permission to include the file in here. Link to his design if you just want to download the holder: https://www.thingiverse.com/thing:4983668 You will need to multiply the Card Holders to print 24 of them to fill the rolodex. And you need 2x of the FrameSide and 2x of the RollerSide to complete the assembly. The holes in the Hub and FrameBase parts are designed to allow the screws to self-tap into the plastic. Don't over-tighten to avoid stripping the threads. If you should strip the threads you can replace the screw with a longer one (say, 12 or 15mm), since the holes go all the way through the parts. Tolerances are designed to be printed on a machine with a 0.4mm nozzle that makes holes 0.1mm under-size from the designed hole size.