Tamiya Mini 4wd rc STEERING AWD!

thingiverse

This is my childhood dream! the project is not very simple,I did not think to publish it, but with a little experience in modeling it is possible to realize... The chassis is Super II the only (not very) difficult piece is the front shaft, i've simply soldering the stock shaft with a normal tin soldering iron and two pieces cut of an another stock shaft. (Dn't use the steel shaft for tin soldering) The spacers keep the bushings stuck to the frame. the screw I used is the stock screw M2, some will have to be cut, so that they do not interfere. the bearing i've used is 15x10x4 The part list is one mini4wd Super II Chassis one kit of M2 screw (short type) one kit of alu spacer two 15x10x4 bearing one nano servo Turnigy T531-BBD with +/- 25x20x8mm (nano servo support) OR one 9g class micro servo (use generic micro servo plate) one turnigy 20A BRUSHED ESC one 2/3 channel receiver (best is small dimension) I created a controller simply by joining the pcb of the receiver and the esc with a soldering cable.