Tamiya Super Astute Front Spindle (LH/RH)

thingiverse

LH and RH steering spindles for the Tamiya Super Astute. You can press out the axles out of another donor Tamiya vehicle and these should fit these carriers. You will likely want to ream the holes with a 5 mm and 3 mm drill bit. If the axles are not tight, due to tolerances of your printer, you may need to shrink the 5 mm hole slightly. UPDATE: I have added a V2 version that has reduced the spindle hole - which should result in a tighter fit (depending on tolerances of your printer). I would still recommend lightly reaming the hole with an appropriately sized bit (start with a 11/64 or 4.5 mm drill bit; then try a step bit or 5 mm drill bit).