Tarot T4-3D Gimbal Arm Mount

thingiverse

YOU MUST SCALE UP BY 10 TIMES!!!!!!! This is a small assembly of pieces designed to mount 10mm tubes at the correct spacing to attach the Tarot T4-3D Gimbal. THIS DOES NOT INCLUDE THE 10mm SHAFT AS MOST 3D PRINTED TUBES ARE FRAGILE The idea is to mount this onto a drone, In my case the DJI F550, to extend the gimbal past the arms and props so that you have professional video quality with no distractions. I suggest "Gimbal Mount Test" for mounting to the plate, as it will sit better, while the "Final Small Gimbal" is better suited to epoxy to a plate to mount the battery on. So far I have only printed one part, and three more are printing as I type, so I don't have a photo of the final use. When I do, it will go up here. In the future, I also plan to make add to this to make it a detachable handheld gimbal, because I am cheap and cannot afford two gimbals... Please feel free to ask any questions. Print Settings Printer: Markforged Mark II Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: YOU MUST SCALE UP BY 10 TIMES!!!! The slicer had a problem for some reason and you need it to be scaled up by 10! I printed this on a Markforged Mark II in NYLON filament. The Mark II is incredibly accurate and precise and the nylon parts it prints are ridiculously strong. IF YOU ARE USING ABS, you need to print this with an infill of AT LEAST 50% if you do not want to lose your gimbal and GoPro. Post-Printing May be Required Depending on your printer you may need to tweak the settings and scale to make it fit on the 10mm shaft the way you like. You may also need to file or sand the interior or add a small spacer such as a piece of theraband. I also recommend smoothing the surface for using mounting tape, while roughing the surface if using epoxy.