TBS Discovery or F450 based. Isolated FPV Camera mount. for Sony Super HAD Board Camera

thingiverse

UPDATE. This works quite well but I've noticed the plug on the camera board is quite close to the Quad-copter's Arm on my particular camera. (But still works) So to resolve this issue I have made an extended version: "fpv-camera-isolation-mount-extended-V2.stl" This is slightly longer to give more clearance If your camera board has clearance issues. This is my version to fit my SONY Super HAD Board Camera. You could mount the camera with bolts and spacers but i just opted to use Sticky pad to space it out and tie wrapped it on. Seems to work well :) You can Buy the isolation rubber balls from here X4: Vibration damping ball (65gr) http://www.hobbyking.com/hobbyking/store/__40603__Vibration_Damping_Ball_65g_Bag_of_8_.html Instructions You could mount the camera to the mount with bolts and spacers but i just opted to use Sticky pad to space it out and tie wrapped it on. Seems to work well :) You can Buy the isolation rubber balls from here X4: Vibration damping ball (65gr)