Tecsun PL-368/GP-7 Puck Stand

prusaprinters

<p>This is a puck stand for the Tecsun PL-368 and County Comm GP-7 radios. This stand features a lower cut front to match the lower speaker location of these new radios. The older versions of these radios had the speaker located higher on the front. Ths stand also has a recess in which to store the T antenna when not in use.</p><p>I printed the model with black Overture PLA Pro.</p><p>Layer height .28 mm</p><p>Nozzle temp 230 C</p><p>Bed temp 60 C</p><p>No supports necessary for plain version. Supports might be necessary for the labelled versions.</p><p>I used a raft for bed adhesion just because I get more consistent results but it should not be necessary.</p><p>Print with the open side up. The model is already in this orientation.</p>