Arrow shaft airplane
thingiverse
Parts for an RC airplane with a carbon arrow shaft as the body. The arrow I used is from a bi-mart 3 pack and has a diameter of 7.5mm. I used and emax rs2205 with a 6" propellor, little bee 30A ESC, and a 1300mah 4s lipo. The wing is about 30" wide and made from DTFB and instructions from: https://bit.ly/2sfmlhL I used some tg9e servos from hobby king and hot glue, super glue, tape, and zip ties. Oh I did end up buying a roll of servo wire to extend the wires from the tail forward. The tail was just some made up dimensions and I cut it with a razor blade, boom. You might want to use a bigger motor and prop for efficiency, but this setup provided plenty of power and speed for comfortable flight. Also I used OnShape to design the whole thing. If you need to copy the files to tweak it for your own needs feel free. https://cad.onshape.com/documents/67ccd396fd9c8bff1ca0a789/w/3802d878ae666a645a8e303f/e/bf6a9957cafc414d90e37962
With this file you will be able to print Arrow shaft airplane with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Arrow shaft airplane.