The BangBang Single shot Pistol for 22LR blank cartridge V2

thingiverse

NOT for LIVE ROUNDS!!!!!!!! Blanks only! Single shot Pistol for 22LR blank cartridge. NOT for LIVE ROUNDS!!!!!!!! Blanks only! Update for this model: Use a 8mm outer diameter steel pipe with 1mm thick walls for barrel insert. Added a hook on the hammer that engages with the barrel to keep the barrel locked as the round goes of. To swing the barrel open to insert next round, pull the hammer slightly back to disengage the hook, then depress the trigger all the way, barrel should pop open, remove spent cartridge. Print the barrel, trigger and hammer solid. The frame should be printed with at least 8 walls or more. Use screws or similar for pins (4mm) or the supplied pin models except the one for the hammer spring. Use appropriate springs for the trigger and hammer Print frame with front tip and bottom of grip touching the bed. Use brim and tree support. Print barrel with front sight facing down, Use a small 3mm screw as firing pin, cut to appropriate length , file tip like a wedge Use a tension spring for the hammer and the trigger PS! This pistol is capable of firing live rounds, it is not intended to do so, use at our own risk!