The Fidget Stick
cults3d
This is a model of a fidget stick (if you don't know what a fidget stick isGoogle for it. The spinner stick is printed as is in one piece. It has a rounded contour, hollow in the center and has extra solid material at both ends, acting as weights. I printed it with PLA, 0.2mm layer, 70C PEI bed, 200C nozzle, and with material cooling fan on. The important part is to print with very high infill percentage (I used 95%) since this makes the weight at both ends and with no material support. It's useful to make the ends more grippy. Find a grippy and thin material, glue it to the two flat ends and then cut with scissors or an XActo knife. The OpenScad source file is included here but the included STL should be just fine..
With this file you will be able to print The Fidget Stick with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on The Fidget Stick.