The HomeCube - case illumination
prusaprinters
<p><strong>Note:</strong> This file set is an extension to the <a href="https://www.prusaprinters.org/prints/99050-the-homecube-main-page-a-smarter-printer-enclosure">HomeCube</a> enclosure project. To make use of this file set, you have to download the <a href="https://www.prusaprinters.org/prints/99050-the-homecube-main-page-a-smarter-printer-enclosure/files">basic file set and building instructions PDF</a> as well.</p><p>These are the printed parts needed for inside illumination of the HomeCube's case. If applied as instructed (see the building instructions linked above), the LED light sources can be unplugged and be taken off with the case as well as be unclipped and remain on the base plate when taking off the case (to serve as a working light for maintenance or repair of the printer).</p><p>LEDs may optionally be connected to the printer's PSU (so the light will automatically be turned on and off with the printer), however, in this case the LEDs' voltage has to match the printer's (12 or 24 Volt).</p><p>You may either use regular LED strips and carrier profiles like I did (see photos) or inexpensive aquarium light LED tubes like <a href="https://www.amazon.de/LeftSuper-Aquarium-Kleine-Amphibien-Wasser/dp/B093C29VHH/">this.</a> </p>
With this file you will be able to print The HomeCube - case illumination with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on The HomeCube - case illumination.