The Legend of Zelda - Hylian Shield (Breath of the Wild)

thingiverse

**Update October 29, 2018:** _I have added the Fusion 360 source project (.f3d file) to the files section for anyone who wants to tweak the design._ --- This is a model of the *Hylian Shield* from *The Legend of Zelda: Breath of the Wild* made specifically for multi-extruder printers. **Please be aware that the colourized version of this model was not designed to be printed in pieces on a single-extruder machine and assembled afterwards.** Use *hylian_shield-onepiece.stl* to get everything at once in a single colour. The print in the cover photo was done on a quad extruder Prusa i3 MK2 MMU as follows: - **hylian_shield-body.stl** *silver PLA (extruder 1)* - **hylian_shield-plate.stl** *navy PLA (extruder 2)* - **hylian_shield-zigzags.stl** *silver PLA (extruder 1)* - **hylian_shield-triforce.stl** *gold PLA (extruder 3)* - **hylian_shield-triforce_center.stl** *navy PLA (extruder 2)* - **hylian_shield-phoenix_flat.stl** *red PLA (extruder 4)* In addition to the .stl files used in my print, I have included the following: - **hylian_shield-phoenix_raised.stl**: This can be used in place of the *flat.stl* version if you prefer the phoenix to be raised off of the shield plate rather than level with it. - **hylian_shield-onepiece.stl**: This can be used to print everything at once in a single colour/material. Note that this uses the raised version of the phoenix, as it would otherwise blend right into the shield plate. Note that I only needed **hylian_shield-triforce_center.stl** because Slic3r refused to play nicely with the central triangle in *plate.stl*. If you use a different slicer, you may find that you don't need *triforce_center.stl* at all. When printed at 100% size, the shield measures approximately 124mm x 100mm. Happy printing!