The Lost Code insert (for Kickstarter version)

thingiverse

This is an insert designed to fit the Kickstarter** version of The Lost Code from Mojito Studios. It includes storage for my replacement log stone token holder model (<https://www.thingiverse.com/thing:6022113>). If you don't want to use my log stone token holders, there is room to place the cardboard logs from the original game. There is a lot of room in the box, so to make everything fit securely there is a spare box which is mainly used as filler, and the stone tokens box is quite comfortably large for grabbing the tokens out of the box. The boxes print best at 0.16 line height (0.4 nozzle) but 0.20 or thicker is fine for everything else. You really want to use 0.16 (or lower) for the boxes with lids as there are some small but steep overhangs that are supported much better by a slightly smaller line height. (Check your slice preview.) No supports are needed if you print at 0.16 or lower. I printed these with 15% gyroid infill, but you can use 10% infill if you increase the number of top shell layers by one (or if you don't care about slight imperfections in the bottoms of the boxes). PLA/PLA+ works great for all of these. The number of copies of each model to print (if more than one) is at the end of each file name. Finally, the lids for all the boxes are friction fit and can be stored on the bottom of their boxes so they don't get lost during play. The tolerances on these can be somewhat tight, but they came out beautifully on my Bambu X1C. ** I don't think there is a plan to have different sized boxes for this game but in case they ever do release different versions, this one is for the game as delivered to Kickstarter backers. The box is approximately 228mm x 228mm x 69mm.