The wine barrel planter

thingiverse

Become a barrel maker! Print and assemble this cute wine barrel planter. This is a new object of the legendary Dreamtime24's wine barrel series :) The wine barrel planter makes a perfect gift. The wine barrel planter really consists of 19 single staves which give the barrel a realistic look. The barrel is 8,5 cm (3.3 inches) high and 9.7 cm (3.82 inches) wide. The inner pot has an inner diameter of 7.5 cm (2.9 inches) and an inner heigth of 6.8 cm (2.7 inches). Please do not resize the model in your slicer, as the tolerances are designed for the present size. The inner pot should be printed in PETG or a similar material to make it resistant against the humid soil. If you need another wine barrel without the flower pot functionality, you might consider my following Thingiverse objects: https://www.thingiverse.com/thing:5390822 https://www.thingiverse.com/thing:5396937 https://www.thingiverse.com/thing:5428998 https://www.thingiverse.com/thing:5429028 List of items to print: - Planter stave V1.stl Print this item 19 times in a brown color. - Planter cover bottom V1.stl Print this item once in a brown color. - Planter cover top V1.stl Print this item once in a brown color. - Planter ring small V1.stl Print this item once in any color you like. - Planter ring large V1.stl Print this item once in any color you like. - Planter inner pot V1.stl Print this item once in any color you like in PETG or another water resistant material. - Planter stave +1mm V1.stl - Planter stave -1mm V1.stl Print in a brown color only if the staves do not form the 360 degrees angle. Use these segments as a substitution for one or more normal segments. Example: If there is a 2 mm gap, exchange 2 normal segments against 2 segments which are 1 mm wider each. The assembly is easier than the assembly of my other barrels. You will need a rubber band to avoid frustration. Please look at the assembly instructions further down. No glue is needed, everything comes together nicely. Enjoy printing this object.