Thermocouple Cable Strain Relief
cults3d
I designed this after continuously repairing the cable after the fragile cables would break from normal use. It may be a bit overkill but it should support the cable enough to prevent the smaller internal wires from breaking. This connector uses 4 M3x8 screws and 4 M3 nuts to hold the two halves together. The spacing for the nuts is a little tight so a soldering iron might be needed to heat them and press them in place. Another method (what I did) would be to heat the nozzle of your printer and lower the Z axis and nozzle on top of the nut. This will heat the nut up and press it into the part. Happy printing and I hope this helps!
With this file you will be able to print Thermocouple Cable Strain Relief with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Thermocouple Cable Strain Relief.