Third hand
prusaprinters
<p>This is a third hand holder inspired on <a href="https://www.thingiverse.com/thing:2860825.">https://www.thingiverse.com/thing:2860825.</a> </p><p>The joints are held by friction so its possible to adjust the position with a little bit of force. Its recommended to use metal washers between the screws and the arm pieces so the screws don't get loose.</p><p> A 25mm M3 screw and nut are needed on the jaw pivot point and a 20mm M3 screw is used to attach the Jaw to the Jaw coupler.</p><p>10mm x 5mm magnets can be press fitted into the base (three is good enough).</p><p>Beware the Crank, the CylindricalNutL and one side of the DualScrew are left handed threads.</p><p>See the attached 3mf file for suggested printing settings</p>
With this file you will be able to print Third hand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Third hand.