Tiny Whoop Nano Frame
thingiverse
**This Whoop frame is designed specifically for the Tiny Whoop Nano FC!** This is a 55mm nano whoop frame. The Camera holder is angled at 20º After testing and breaking a few camera holders I decided to have the holder as a separate component that snaps into the frame eliminating the need to re-print the whole frame if it breaks. ( I uploaded a version of the frame with the holder combined.) The Motor holder has 2 variants for 6x15 and 6x17 brushed motors. The Battery holder and motor holders are attached with M1.2x4mm Micro Size Self Tapping Screws. The canopies clip in between the front and back duckts. To Assemble: 1. Feed the Cam and receiver through the bottom and snap in the FC 2. Snap the receiver on top of the FC in the provided cut-out. 3. Snap-in the cam-holder and the camera into the holder. 4. Place the motors in the Motor mounts and screw to the frame. 5. Screw the battery holder to the bottom. 6. Enjoy! Update: Added 7 x 16 frame and motor holders
With this file you will be able to print Tiny Whoop Nano Frame with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Tiny Whoop Nano Frame.