TinyTrainer Gauntlet - arm and motor guard

thingiverse

Want your Five33 TinyTrainer to be even more indestructible? Try this Gauntlet, it's a remix of my TinyTrainer Glove https://www.thingiverse.com/thing:4690939 which has a motor guard too, thanks to Luca Bonucci for the motor guard idea. The motor guard height is 10mm and meant for 19mm diameter or smaller motors, like theMamba 1404's on my TinyTrainers. It's designed for the current version of the frame with oblong holes to accommodate 12x12 and 9x9mm motor mount patterns. There are 6 variants of the design: 12x12mm motor mount with zip tie 12x12mm motor mount with zip tie, mirrored for symmetry 12x12mm motor mount without zip tie (use normal ones) 9x9mm motor mount with zip tie 9x9mm motor mount with zip tie, mirrored for symmetry 9x9mm motor mount without zip tie (use normal ones) The 12x12 & 9x9 differences are just where the holes are for the heads of the motor bolts. ----- Print settings: 0.2mm layer height, 3 or 4 perimeters, 100% infill, support everywhere, make sure it's all removed afterwards for a snug fit. Your printer needs to be really dialled in to print these, I got a tip to get excellent TPU prints with almost no stringing on my Prusa i3 Mk3 which I now use all the time - set retract to 4mm, Z-lift to 0mm and cooling fan at 100% all the time. ----- Installing the guards is a little tricky, see the instructions & pictures in the TinyTrainer Glove - https://www.thingiverse.com/thing:4690939 You can sell prints of this, but don't overcharge, and link back here. Tips are most welcome https://www.paypal.com/paypalme/Haku3D and will encourage me to make more designs for everyone to benefit.