Tires for Neato wheels for high pile carpet

prusaprinters

<p>On carpets with higher pile the stock wheels and also the other tires I designed have not enough grip and causing wheelspin so.</p><p>So I designed a special profile for this carpet which will have much more grip there than the other profiles. A test was successful.</p><p>On hard floor these tires will produce a bit more noise than the stock wheels.</p><p>Edit 2020/12/19: Inspired by the remix by <a href="https://www.thingiverse.com/thing:3347822">jlcornwell</a> which needs support to can be printed I simply scaled my model down to 50% in height and print it twice. Mounted both parts shifted by a half tooth on the wheel the robot runs more smoothly on hard floors now. See last photo.</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>FIashForge Dreamer</p><p><strong>Rafts:&nbsp;</strong></p><p>No</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Resolution:&nbsp;</strong></p><p>0.2mm</p><p><strong>Infill:</strong></p><p>100%</p><p><strong>Filament:</strong></p><p>TPU white</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>Recommended print settings:</p><p>Material: white or clear TPE or TPU with shore 85A or lower</p><p>Extruder temperature: 235°C</p><p>Print bed temperature: 80°C</p><p>Print speed: 25mm/s</p><p>Estimated print time per part: 1:30h</p><p>Material per part: ca. 15g</p><p>I printed direct to the glass plate without capton tape because on earlier tries the adhesion of the TPE on the tape was so strong that i lifted the tape from the glass plate when removing the parts.</p><h3>How I Designed This</h3><p>designed with FreeCAD</p><h3>&nbsp;</h3><p>Category: Replacement Parts</p>