Titan Aero BLTOUCH and Layer Fan whit x Carriage

thingiverse

v2 x Carriage Corrected some gaps bigger hole for the cables ( now the stepper connector fits easily ) added reinforcement in the stepper holder Layer Fan corrected dimensions for the layer fan added more room for the air intake corrected the holes for the screws V1.0 new support for the cables to exit to the back added 1 mm free space for lower belt ( to user with 16 tooth ) corrected the layer fan position and added thickness , the holes are for m3 screws , no nut needed use the large Titan Screws use the wheel not the alem screw for the feed screw ( no room to adjust with the alem ) the offsets for the probe in Marlin are define X_PROBE_OFFSET_FROM_EXTRUDER 5 // X offset: -left +right [of the nozzle] define Y_PROBE_OFFSET_FROM_EXTRUDER 26 // Y offset: -front +behind [the nozzle] define Z_PROBE_OFFSET_FROM_EXTRUDER -0.91 // Z offset: -below +above [the nozzle] and im using this values in the Marlin ubl section : define UBL_MESH_INSET 1 // Mesh inset margin on print area define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited. define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X define UBL_PROBE_PT_1_X 5 // These set the probe locations for when UBL does a 3-Point leveling define UBL_PROBE_PT_1_Y 274 // of the mesh. define UBL_PROBE_PT_2_X 10 define UBL_PROBE_PT_2_Y 30 define UBL_PROBE_PT_3_X 195 define UBL_PROBE_PT_3_Y 26 define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle this is a remix of 3 things https://www.thingiverse.com/thing:2207083 https://www.thingiverse.com/thing:2240359 https://www.thingiverse.com/thing:2192480