Titan Aero mount for X-Carriage [MK4]

thingiverse

This is mount for titan aero extruder with NEMA 17 20mm (!) pancake motor. Attention! 25mm motor will not fit, you will need to modify model to move X endstop Pin. This design was made to make easy move from bowden extruder with MK4 X-Carriage to direct drive Titan Aero. You will get nosszle in same position on X and Z, but it will be moved a bit by Y (without loosing print area after little modification of Bed size in firmware. This is my parameters for bed size and home offsets: // The size of the print bed define X_BED_SIZE 215 define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. define X_MIN_POS 0 define Y_MIN_POS -4 define Z_MIN_POS 0 define X_MAX_POS X_BED_SIZE define Y_MAX_POS Y_BED_SIZE define Z_MAX_POS 180 Print without supports. If you are using BLTouch, you can try to print this: https://www.thingiverse.com/thing:2956596