Titan Aero Prusa i3 MK2 Mount

thingiverse

Update: 26042017 From comments that have been made it seems that not using the spacer and modifying the firmware define Y_MAX_POS 195 // modified from 210 to 195 gives the correct / usable positioning. All the other firmware modifications from below should still be used. Update: 29032017 Deleted v1 mount. 19mm Rear Spacer Added. To account for Y-Axis Offset as per original, but may not be required. You loose 20mm along the Y-Axis but gain 5mm along the Z-Axis. The X-Axis is unaffected. All the original wrap around mounts work with this bracket. Firmware Mods. Required ( Not Checked ). // Home position define MANUAL_X_HOME_POS 0 define MANUAL_Y_HOME_POS -22.2 define MANUAL_Z_HOME_POS 0.15 // Travel limits after homing define X_MAX_POS 250 define X_MIN_POS 0 define Y_MAX_POS 210 // may need to be modified to 195 see above define Y_MIN_POS -22.2 define Z_MAX_POS 215 define Z_MIN_POS 0.15 define X_PROBE_OFFSET_FROM_EXTRUDER 0 define Y_PROBE_OFFSET_FROM_EXTRUDER 25 define Z_PROBE_OFFSET_FROM_EXTRUDER 0 //Titan Aero Steps/mm define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,418.5} Update: 27032017 Remixed version for the BlTouch. Titan Aero Prusa i3 MK2 BLTouch Mount Update: 27032017 Uploaded a v2 file with tweaked holes for the Pinda mount, You should probably use this file instead of the original. Description This is a Remix of @GregoryHolloway's Original Prusa i3 MK2 E3D Titan Aero Upgrade, I decided i would prefer to be able to just mount the new assembly to the original carriage as i use a modified version with bearing clamps. The mounting holes should match any of the Prusa i3 MK2 Carriage variants that use the original 2 mounting holes. There is also a 3rd connection point where the original carriage connected to the direct drive motor. The design also tries to keep some of the useful cable routing. I haven't printed this as yet but it should work ok, also it includes the newer style MK2S Pinda mount. Print Settings Printer: Custom Ultimaker Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30