Titan Aero X-axis Cable Chain for Anet A8

thingiverse

I already had Starwhooper's chain on the A8 previous to the Titan Aero install so I modified the chain mounts for the new setup. I designed this around one of my remixes, <a href="https://www.thingiverse.com/thing:4943978">Titan Aero with BLTouch Carriage Mount for ANET A8.</a> I'm sure it will work with the original design as well. In this design, the chain is offset further away from the X-axis motor plane so you will need to print a motor mount extension and sandwich it between the original chain mount and the motor assembly to accommodate the difference. The X-axis carriage plate mount needs to have backing spacers to fill the areas where the old Titan Aero Bracket mounting screws were recessed. Otherwise, the new mounting screws will compress the print into those spaces and wreck it. You will need three of these. Clips in the pics used are these: <a href="https://www.thingiverse.com/thing:2446660">"Spinal" Improved Linear Chain Addition (Anet A8) by Hypertoken</a> Kudos to Starwhooper for the model to base this on!