TOGGLE CLAMP

cults3d

NOTE: PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE: https://www.patreon.com/PA1_MAKER I needed a strong toggle clamp to glue my part together. So i made this one. Easy to print, only the base and the threaded head need a few supports. Nothing tricky here. Parts are already placed in the right orientation. Quantities are in the file name. (at the end) Parts are placed for maximum solidity. Print the pad in TPU. Print everything with at least 5 walls (i used 7, with 25% infill) For the shafts, boost your temperature a bit to ensure good layer adhesion. Those parts are placed on the bed to give the maximum strentgh against sheer forces of the lever and links. But this means it is also a bit weak when you put the screw in place. So be sure to have a good layer adhesion. ;) Tolerances have been calculated to ensure a nice free movement. Exploded view included for easy assembly. You will need: m5x16 (2x) for the base. m5x 10 (6x) for the rest. If you have any questions/suggestions, you can reach me here or on my facebook page: https://www.facebook.com/PA1MAKER