Token Box for Pokemon TCG
Summary I wanted a nice box for storing the dice and token for the pokemon TCG, the approximate shape of a card so it will fit into a thick enough deck box or with your cards in an Elite Trainer Box, or classic BMC white box. Sized to hold the half inch dice that comes with elite trainer boxes which happens to be the same size as the chessex dice that come in the 36 dice block. The larger dice are the clear "coin flip" dice that comes in the elite trainer box. The tokens fit in the circular section and get held in place by the cylinder in the lid, the base of the circular section, has an offset section that allow easy removal of them. Print Settings Printer Brand: RepRap Printer: I2 custom Rafts: No Supports: No Resolution: 0.2mm (0.4 nozzle) Infill: 30% Notes: My printer is a bit loose with the tolerances so i needed to do some slight filing on the latch Post-Printing Some filling might be required Some filling might be required. Wire a piece of wire for the hinge and bend it slightly through the hole in the middle to keep it in place. Keep wire shorter than needed to prevent scratches.
With this file you will be able to print Token Box for Pokemon TCG with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Token Box for Pokemon TCG.